preço piezoeléctrico high-density da placa para a colheita da energia

1.Product Description

Dimension:

Length: 45mm
Width: 9mm
Height: 0.2mm

Piezoelectric strain constant d33: 620
Capacitance (nF): 63
Resonant frequency (kHz): 31.1
Coupling coefficient K31 (%): 30.2

Application:High Frequency Wave Filter, Resonator, Frequency Discriminator,Ultrasonic Sensor, Vibration Sensor, Material stress sensor, Pressure sensor, Vibration generation, Energy/Electricity harvesting, compression sensor and others…

2.Some Standard Size of Piezo Plates and Block

The range of Frequency PiezoceramicRectangle/Square:

Length: 3mm - 176mm
Width: 1mm - 120mm
Height: 0.1mm - 30mm

Some Standard Size of Rectangle and Square Piezo Ceramic Element (1)

Some Standard Size of Rectangle and Square Piezoelectric Ceramic (2)

Algum tamanho padrão do retângulo e de cerâmico piezoeléctrico quadrado (3)

3.PZT Material

We usually provide P - 41, P - 42, P - 43, P - 51, P - 52, P - 53, P - 81, P - 82, P - 83, PSnN - 5,

PMgN - 51, PZT - 5H, PZT - 5X, PCrN - 4, PliS - 51, PbaS - 4, PbaS - 5, BaTio3.

PZT materials are categorized as functional ceramics. In sensors they make it possible toconvert forces,
pressures and accelerations into electrical signals, and in sonic and ultrasonic transducers
and actuators they convert electric voltages into vibrations or deformations. Piezoelectric materials
are classified according to their chemical composition on the one hand, and by the specific
application conditions on the other.

PZT ceramic is used in a wide variety of applications. Soft (sensor) PZT ceramic powders are typically used
when high coupling and/or high charge sensitivity are important, such as in flow or level sensors;
ultrasonic nondestructive testing/evaluation (NDT/NDE) applications; or for accurate inspections of automotive,
structural or aerospace products. Material characteristics include a high dielectric constant; high coupling;
high charge sensitivity; high density with a fine grain structure; a high Curie point; and a clean, noise - free
frequency response.

Hard (high power) PZT ceramic powders are used when high power characteristics are required,
including applications such as the generation of ultrasonic or high - voltage energy in ultrasonic cleaners,
sonar devices, etc. Important powder characteristics include a high piezoelectric charge constant (d33); a
higher mechanical quality factor that reduces mechanical loss and enables a lower operating temperature; a
low dissipation factor that ensures cooler, more economical operation; high dielectric stability; and low
mechanical loss under demanding conditions.

4.Applications of Piezoelectric Ceramics

5. Features

1.High efficiency: high mechanical parameter Q, the transduction efficient between electricity and sound above 95%.
2.High amplitude: the transducer strength is improved by fixing the high speed vibrator directly on the base of washing groove with bolt. Compare with a magnetic expansion vibrator, its amplitude can be improved above 50%.
3. Good heat resistance: a large range of working temperature, low resonance impedance and heat productivity.
4. Good construction: fastened by bolt, easy for assembling, high reliability.
5. The life of more than 5000 hours

6.High electromechanical conversion efficiency

6.Our service

Package:at first, we all use dual - layer foam to wrap the piezo ceramics duo to its frangibility, then we use suitable the box to put it inside and stick tightly to make sure it perfectly.

Delivery Time:standard product will beshipped out within 2working days after payment received.

Payment Methods: T/T, Paypal,West Union

Warranty:100% brand new when leaving the factory. The seller guarantee quality of the products (excluding wearing parts) for a period of 1 year from the date of trial run finish under our technician ' s guidence.  

7.Images